FlyCart30 Tethered UAV

Product Model

Classification

Tethered UAV

Online message

Basic Introduction
Technical Specifications
Control parameters
Mission payload

- Commodity name: FlyCart30 Tethered UAV
1. General Specifications
  1. Compatible Models: DJI FlyCart 30
  2. Support Flight Altitude: 100m, 200m or 300m, with corresponding cable lengths of 110m, 220m or 330m
  3. Support Flight Duration: >24h, Continuous power supply from the generator
  4. Safety Features:
    - Contactless operation, away from high-voltage electricity,
    - The cable follows the drone's Up&Down, synchronizes and automatically retracts
    - Generator stalling, cable maintains automatic recycling function
    - Cable breakage, short circuit, detachment, automatic shutdown of high voltage
  5. Environmental Features:
    - Working: -20~45℃, Storage: -40~65℃
    - Protection class: Air module IP54, Ground module IPx4
  6. Packing:
    - Trolley case, Accommodate Ground module, Air module, and others
    - Sizes: D760×W720×H680mm, Weight: 30kg
2. Tethered Box (Ground Module)
  1. Input Voltage: 380±10%VAC, Three-phase five-wire@50Hz
  2. Output Voltage: 800~1000VDC, Factory default 1000VDC
  3. Output Power: 40kW (rated long-time output), 50kW (peak)
  4. Cable Length: 110m, 220m or 330m Standard configuration optional, Can customize length
  5. Cable Reel Speed: 0~5m/s, Intelligent dynamic continuous adjustment, variable acceleration control
  6. Cable Pulling Force: 0~30N, Intelligent continuous adjustment of gear, torque output value, and torque slope
  7. Communications: Support multi terminal interconnection and intelligent display control, Optional Fiber
  8. Data Show: Voltage, current, temperature, power consumption, outlet length, operating time, etc.
  9. Control Modes: Button, App, HMI, and Drone controller (supporting display, settings, and control)
  10. Protection Function: Protection functions such as overvoltage, overcurrent, overtemperature, and short circuit
  11. Warning Function: Fault content displayed on screen, with acoustic-optic alarm
  12. Cable Material: Silver-plated copper+Teflon insulation+Single-mode Fiber+Sheath film+Kevlar weaving
  13. Electrical Interfaces: WS40, LP20, Switch, Bluetooth antenna, Type-C, FC
  14. Sizes: D560×W440×H520mm
  15. Weight: Box 46.8kg, Cable 38g/m
3. Aircraft-Mounted Power (Air Module)
  1. Input Voltage: 800~1000VDC, Wide voltage range input
  2. Output Voltage: 58.5VDC, Stable voltage output
  3. Output Power: 20kW (rated long-time output), 24kW (peak)
  4. Installation Method: Replace a drone battery and directly plug in and lock it
  5. Electrical Interface: LP20, Floodlight interface, Battery interface, Payload interface
  6. Sizes: 308×293×86/142mm
  7. Weight: 6.8kg, Replace 11.3kg drone battery
Stable flight tethered UAV is designed for aerial operations that require steady flight and continuous power. It uses a tethered connection between the UAV and ground power system, allowing the aircraft to remain in the air for extended periods. This design can support aerial lighting, emergency response, temporary illumination, event support, and other civil applications. Stable flight performance helps keep the UAV position steady during operation. The tether also reduces the need for frequent battery replacement or landing, making the system suitable for long-duration tasks. With a practical structure, continuous power supply, and flexible deployment, stable flight tethered UAV provides an efficient aerial solution for users who need reliable lighting and extended operating time.
1. L24 Floodlight
  1. Light Power: 2400W, Super Bright Mode 3600W
  2. Luminous Flux: 400000 lm@168 lm/W
  3. Input Voltage: 800~1000VDC, High voltage, low current, low temperature, higher illumination
  4. Lighting Area: 3000㎡@50m, 10000㎡@100m, Interchangeable lenses to support larger areas
  5. Illumination: 260lux@30m, 95lux@50m, 24lux@100m
  6. Weight: 1450g, 4 pieces
  7. Installation Method: Secure the arm with rubber straps
  8. Control Mode:
    - Button, App, HMI, and Drone controller (supporting display, settings, and control)
    - Follows the drone's Up&Down automatic Turn on and off
    - Manually adjust the gear, flash mode
2. L48 Floodlight
  1. Light Power: 4800W, Super Bright Mode 10000W
  2. Luminous Flux: 800000 lm@168 lm/W
  3. Input Voltage: 800~1000VDC, High voltage, low current, low temperature, higher illumination
  4. Lighting Area: 3000㎡@50m, 10000㎡@100m, Interchangeable lenses to support larger areas
  5. Illumination: 438lux@30m, 161lux@50m, 42lux@100m
  6. Weight: 2950g, 4 pieces
  7. Installation Method: Secure the arm with rubber straps
  8. Control Mode:
    - Button, App, HMI, and Drone controller (supporting display, settings, and control)
    - Follows the drone's Up&Down automatic Turn on and off
    - Manually adjust the gear, flash mode
3. SP-2 Cleaning Spray Gun
  1. Mounting Bracket Sizes: 360×135×172mm
  2. Mounting Bracket Weight: 1.38kg
  3. Shrinkage Size: 1595×100×186mm
  4. Developed Size: 3050×100×186mm
  5. Weight: 6.1kg
  6. Installation Method: Quick detachable type
  7. Supply Interface: FlyCart30 system interface
  8. Cleaning Method: Swing left and right by 30°
  9. Control Mode: DJI PSDK
4. BWG-25 Fire Extinguishing System
  1. Fire Hose Spec: 25mm@Spray gun length 1950mm
  2. Launch Method: Laser aiming, single&double shot
  3. Spray Angle: Can be manually adjusted
  4. Effective Range: 10m~15m
  5. Application Height: Suggest 0m~70m, Fire hose length 90m
  6. Pressure Resistance: 2.5Mpa, Burst pressure 3.2Mpa
  7. Fire Suppressant: Fire foam, Fire water agent
  8. Installation Method: Quick detachable type
  9. Sizes&Weight: 1925×130×160mm, 1.65kg
5. YWG-25 Fire Extinguishing System
  1. Fire Hose Spec: 25mm
  2. Spray Gun Length: 1950mm
  3. Spray Angle: Can be manually adjusted
  4. Effective Range: 10m~15m
  5. Application Height: Suggest 0m~70m, Fire hose length 90m
  6. Pressure Resistance: 2.5Mpa, Burst pressure 3.2Mpa
  7. Fire Suppressant: Fire foam, Fire water agent
  8. Installation Method: Quick detachable type
  9. Sizes&Weight: 933g (Spray gun), 9.65 kg (Including a 90m water hose and connector)
6. SL30 Speaker&Spotlight System
  1. Light Power: 300W
  2. Sound Pressure: 130dB@1m
  3. Broadcast Range: Effective 500m, Max 800m
  4. Visible Range: ≥500m
  5. Broadcast Modes: Real time shouting, recording, text playback, text to speech conversion, alarm sound
  6. Light Output Angle: Pitch angle 0°~90, light output angle 16.7°
  7. Lighting Area: 176㎡@50m, 706㎡@100m
  8. Installation Method: Sliding installation
  9. Weight: Speaker 450g, Spotlight 1280g, Quick-release bracket 72g
7. BL28000Sed Gasoline Generator
  1. Output Power: 23kW (rated long-time output), 25kW (peak)
  2. Tank Capacity: 40±0.5L
  3. Start Mode: Electric start
  4. Sizes: D1530×W880×H780mm
  5. Weight: 375±5kg

National Service Advisory Hotline:

+86(25)58786848

Address: Sicai Building, No.10 Yongzhi Road, Qinhuai District, Nanjing

Telephone:+86 15365119378/+8615366164488

E-mail:794401886@qq.com

Beijing ICP No. 10002622-38

language

Product Consulting

Technical Support